Urban renewal selection means choosing a home that is not built yet. Urbird|Urban renewal, from plan to handover lets landowners walk in first: find the unit on a computer or phone, see the exterior and interior, stand at the window and turn a full circle, then rank three choices.
From the exterior to the living room window
The whole building appears in 3D, and every residential unit can be clicked. Unit types are color-coded, and the legend toggles each type. Click a floor and it opens up, showing every unit outline, shop and parking space. Click a unit and the view focuses on it. Outside the window sit neighboring buildings, terrain, roads, green space and the metro, and trees are drawn at the canopy size expected a few years after completion.
Each unit has three interior views. The overhead view shows room names, clear width and depth, the entry and bed positions. Walk mode is first person, with room buttons that jump to each room and windows that open or close with a click. The 360° view stands at the window and turns a full circle, with mountain names and landmarks labeled.
The whole-building 3D and the interior of every unit are generated from the architectural drawings, with no separate modeling needed, so the home can be walked through before it is built.
Sunlight, summer sun, airflow and window views
Five things are computed for every unit, so two units can be compared before choosing. Sunlight uses the NOAA solar position method with multi-year monthly averages from the Central Weather Administration climate statistics, and each window and wall accounts for shading from neighboring buildings, terrain and the other towers on the site.
- Winter sun: hours and minutes of direct sun in the living room and bedrooms on a clear day, written as "4 hours 15 minutes" so it reads at a glance.
- Summer sun: how much western afternoon sun a unit gets at the summer solstice, easy to see side by side.
- Cross ventilation: from the 2005 to 2024 airport weather-report wind statistics, plus opening positions and window state, giving air changes per hour that recompute as windows open and close.
- Window view: one ray every 1 degree gives the percentage of open view, sky, greenery, distant ridgelines and the upper part of Taipei 101.
- Indoor temperature: following the simplified hourly heat balance in ISO 13790, with hourly lines for the spring equinox, summer solstice, autumn equinox and winter solstice, shown as degrees above or below the project median.
- Public dataBuilding outlines, terrain, weather statistics
- Fixed formulaRay intersection, solar position, wind pressureFormulas and parameters appear in the source line on screen
- FigureOpen view percentage, sunlight hours, air changes
- Brief and reportWritten into each unit's one-page brief and four-page report
Window views are the example here. Sunlight, wind and temperature follow the same flow with different data and formulas.
| What | Shown on screen | Where it comes from |
|---|---|---|
| Winter sunlight | Hours and minutes | NOAA solar position, CWA climate statistics |
| Summer western sun | Afternoon sun at the summer solstice | NOAA solar position, neighbor and terrain shading |
| Cross ventilation | Air changes, recomputed as windows open and close | 2005 to 2024 airport weather-report wind statistics |
| Window view and greenery | Open view percentage, one ray every 1 degree | Building outlines, terrain, canopy after completion |
| Indoor temperature | Degrees above or below the project median | ISO 13790 simplified hourly heat balance |
A line at the lower left of the screen reads "scenario simulation only", and the figures are computed from public weather and building data.
A one-page brief and a four-page report
Every unit has a one-page A4 brief with a fixed 8-cell grid: rooms, area, living room orientation, total price, winter sun, summer western sun, window view and cross ventilation. Every unit gets the same 8 cells, plus up to 3 strengths of that unit and the things worth knowing first. The type is large and the wording plain, so a parent or grandparent can read it through.
For more detail, each unit also has a four-page report. Page 1 gives the unit's highlights and the households it suits. Page 2 holds the data on orientation, layout, sunlight, temperature, ventilation and view. Page 3 compares the mirror unit across the floor and the same unit type on other floors. Page 4 has the floor plan, surroundings, price and method. The briefs and reports for every unit are computed in advance and the same version goes to every landowner, so the information is consistent.
Drag to rank choices, balance computed on the spot
Up to three choices can be ranked, each a unit plus parking, and dragging sets the order, which is the order of preference. A meter on screen shows the allowed range as a middle band and the current total as a marker, and one sentence says whether the total is in range or how far off it is. The balance is computed at the same moment. The balance is an instant estimate, and the final amount follows the approved rights transformation plan.
Each landowner sees only the selection rules that apply, with a rule card for single-unit owners, multi-unit owners, land rights holders, shops and vacant land. Positions are assigned under the selection principles stated in the plan, and the implementer's survey of preferences is covered in Articles 3, 5 and 17 of the implementing regulations. The system puts that process in the landowner's own hands.
Co-owners can form a team, each signing in with an individual account and sharing one list of choices. After registering, an A4 selection certificate can be downloaded, printed or sent to family. The member center shows a seven-stop progress line from the business plan to handover, so landowners always know where things stand.
The system computes every figure on the spot.
Comparing two units side by side
The most common situation in selection is two or three units that each have strengths. The system lists the same data in the same wording: how long the winter sun lasts, how much western sun arrives in summer, how open the window view is, and whether there is a cross breeze. With two units side by side, the difference is visible directly. A mirror unit across the same floor has the same layout facing the opposite way, and page 3 of the report works out that comparison in advance. The same unit type on different floors changes in view and sunlight with height, and that appears on the same page.
Greenery and distant mountains have a place too. Openness is computed window by window, and the view blocked by the building frame is marked separately instead of being mixed into the openness figure. When a balcony view is opened, it automatically stands in the middle of the widest gap between two posts, and the default frame is set at a better angle.
Floor rankings put the whole building side by side. Views, coolness, airflow and sunlight each have ranking cards, at the level of the building, a floor, a unit and its interior, so the ranking of each floor and unit on each point can be seen. Clicking a unit focuses the view and switches to that unit's full-year lines, so no one has to flip between large tables while choosing.
Landowners who gain most from a first walkthrough
For households with elderly family members, the large-type brief and plain-language report can be read page by page, without first learning to read a floor plan. Family members living elsewhere open the same screen on a phone and see what the elders see, so a phone call about one unit stays aligned. Landowners with many co-owners form a team and share one list of choices, with a single screen to point at during discussion. Landowners still deciding can walk through all three candidate units first, then pick which one goes first.
Ask a question directly
When the implementer enables AI selection Q&A (can be enabled per project), landowners can ask in plain words about selection rules, how the balance is calculated, the deadline, or the winter solstice sunlight for one unit. Every answer cites its source, amounts are estimates, and the official amount follows the approved rights transformation plan. Questions are logged, so case officers can see in the back office what was asked, and anything the documents do not cover goes to the case officer directly.
Next step
To see a specific unit first, read about the urban renewal system and the urban renewal system case, or contact the development team to arrange a demonstration.
